Installing Batteries in the Remote Control
1. Press and lift the battery cover of
remote control.
2. Insert 2 x AAA size batteries and make
sure to match the (+) and (–) ends of
the batteries with the (+) and (–) ends
indicated in the battery compartment.
3. Close the battery cover.
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage, which
could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will not function. Replace both
batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix different types of
batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in accordance
with local regulations.
Handling the Remote Control
• Take care of your fingernails when you press and hold the battery release tab.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of excessive
heat.
• Remove the battery from the remote control when not in use for a long period of
time, as it could cause corrosion or battery leakage and may result in physical injury
and/or property damage including fire.
1
3
2
9
L2STB11_IB_110608_Annie.indd 9
11年6月8日 下午3:32
