Logik L2STB11, Instruction Manual

Page: 12 / 44

Connecting to External AV Equipment and VCR
1. Make sure your TV and any other equipment you are connecting to are switched off.
2. Connect one end of the RF coaxial cable (not supplied) to the aerial socket on the
wall and the other end of the cable to the RF IN socket of the unit.
3. Connect another RF coaxial cable (not supplied) between the RF OUT socket of the
unit and the RF IN socket on your VCR.
4. Connect the RF coaxial cable (not supplied) between the RF OUT socket of your
VCR and the RF IN socket on your TV.
5. Connect the coaxial cable (not supplied) between the COAXIAL socket of your
external audio receiver and the COAXIAL socket on the unit.
6. Connect one SCART cable (not supplied) between the TV SCART (EXT1) socket of
the unit and the SCART input socket of your TV.
7. Connect another SCART cable (not supplied) between the AUX SCART (EXT2)
socket of the unit and the SCART output socket of your external AV equipment.
8. Connect the supplied mains adapter (5V DC) to the DC IN 5V socket of the unit
and plug in the mains adapter into the mains socket after you have completed all
the connections.
OR
To RF IN
To RF IN
To Aerial
input socket
of your TV
RF Cable
(not included)
RF Cable
(not included)
SCART Cable
(not included)
RF Cable
(not included)
Mains Adapter
(included)
To TV
SCART (EXT1)
TV
Set-top Box
Audio Receiver
VCR
To DC IN 5V
To mains
socket
To
Aerial
To
RF OUT
To
RF OUT
To
COAXIAL socket
To
COAXIAL socket
SCART Cable
(not included)
COAXIAL Cable
(not included)
To SCART
socket
To SCART
socket of
your TV
To AUX
SCART (EXT2)
RF IN
EXT2 EXT1 TV 5V AUX
RF OUT
12
L2STB11_IB_110608_Annie.indd 12 11年6月8日 下午3:32