10
2. Insert two AAA size batteries. Make
sure the battery match those shown
in the (+) and (–) ends of the battery
compartment.
Battery Installation for the Remote Control
1. Press and lift the back cover up to
open the battery compartment of the
remote control.
3. Close the battery compartment cover.
Within about 5 m
30°
30°
DVD/
USB/CARD
N/P
RANDOM
Handling the Batteries
• Improper or incorrect use of batteries may cause corrosion or battery leakage,
which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• When the batteries are exhausted, the remote will not function. Replace both
batteries at the same time with new ones.
• Do not install new batteries with used ones and do not mix different types of
batteries.
• Do not dispose of used batteries as domestic waste. Dispose of them in
accordance with local regulations.
Handling the Remote Control
• Be aware of your fingernails when removing the battery cover and the battery.
• Do not drop or cause impact to the remote control.
• Do not spill water or liquid on the remote control.
• Do not place the remote control on a wet object.
• Do not place the remote control under direct sunlight or near sources of
excessive heat.
• Remove the battery from the remote control when not in use for a long
period of time, as it could cause corrosion or battery leakage and may result in
physical injury and/or property damage including fire.
Remote Control Operation Range
• The remote control sensor on the front unit is sensitive
to the remote control’s commands up to a maximum of
5 metres away and within a maximum of a 60° arc.
• Please note that the operating distance may vary
depending on the brightness of the room.
