Logik L22FPS10, Instruction Manual

Page: 8 / 20

8
Feed Tube and Pusher
1. Use the feed tube to add liquid and/or solid
ingredients. Use the pusher to push solid ingredients
through the feed tube.
2. You can also use the pusher to close the feed tube in
order to prevent ingredients from escaping through
the feed tube.
MAX F
ILL
• Control the chopping time to prevent the food from becoming too finely
chopped.
• Do not let the appliance run too long when you are chopping (hard) cheese.
The cheese will become too hot, start to melt and turn lumpy.
• Do not use the blade to chop very hard ingredients like coffee beans,
turmeric, nutmeg and ice cubes, as this may cause the blade to get blunt.
If food sticks to the blade or to the inside of the processor bowl:
• Turn the appliance off.
• Remove the processor lid from the processor bowl.
• Remove the ingredients from the blade or from the wall of the processor
bowl with a spatula.
• The processor bowl can only be used without the blender attached to the
motor unit. If you use the unit without the blender, the safety screw cap must
be fitted to the motor unit.
• The food processor can only operate when the safety screw cap is attached
to the motor unit. The processor bowl will not operate if the blender jar is
attached to the motor unit.
Built-in safety lock
(For both Food Processor and Blender)
The motor unit, the processor bowl and the processor lid have
been provided with lock and unlock marks. The appliance will
only function if the lock mark on the motor unit and the lock
mark on the safety screw cap are aligned properly.
Make sure that the lock mark on the processor lid and the lock
mark on the processor bowl are aligned properly.
L22FPS10_IB_final110218.indd 8 18/02/2011 12:12 PM