Logik L185VC15E, Instruction Manual, Page: 28 / 76

Cleaning and Changing the Agitator
• The agitator should be replaced if worn out to maintain optimum performance.
• Always unplug from the mains socket before cleaning/changing the agitator.
• Only replace with the same type. Using a different type may cause damage or
hazard.
• The agitator shaft collar should be kept clean to maintain proper agitator
rotation.
Cleaning the Agitator
1. Press the Brush Release Button to remove the brush from the main body.
2. Use a coin to turn the lock to the unlock position.
3. Remove the agitator cover.
4. Take out the agitator. Pull off the agitator shaft collar. Remove any dust or hairs that are
tangled. Push back the agitator shaft collar. Put back the agitator.
5. Put back the agitator cover and turn the lock to the lock position.
Changing the Agitator
1. Press the Brush Release Button to remove the brush from the main body.
2. Use a coin to turn the lock to the unlock position.
3. Remove the agitator cover.
4. Replace the old agitator with the new one.
5. Put back the agitator cover and turn the lock to the lock position.
28
GB
L185VC15E_IB_5L_150305_candice.indb 28 5/3/15 2:30 pm