29
GB
Switching On
1. Place the kettle on its stand. Connect the
stand’s mains cable to the mains socket.
When the Water has Boiled
The kettle will automatically switch off (indicated by the
symbol ‘0’ ).
•
Never open the lid while the water is boiling. The
steam coming out from the kettle is very hot.
•
If there is insufficient water in the kettle, the
automatic safety cut-out will operate. If this
happens, remove the kettle from its stand. Allow
the kettle to cool for ten minutes before refilling
with cold water. Place the kettle on its stand and
re-boil.
•
Ensure that the switch is not obstructed and the
lid is firmly closed. The kettle will not turn off if the
switch is obstructed or if the lid is open.
•
After removing the kettle, there may be some
water on the surface of the stand. This is
condensation from the steam that causes the
kettle to automatically switch off after boiling. This
is normal and should not be a cause for alarm.
MAX
MIN
1.7L
1.50
1.00
0.5L
2. Press the power switch to the
ON
position (indicated by
the symbol ‘1’). The indicator will light up to show that
the kettle is heating.
0
1
0
1
L17PKB13E_IB_7L_RC130724_Annie.indb 29
24/7/13 2:01 PM
