7
GB
Ensure that the switch is not obstructed and the lid is firmly
closed. The kettle will not turn off if the switch is obstructed
or if the lid is open.
After removing the kettle, there may be some water on the
surface of the stand. This is condensation from the steam
that causes the kettle to automatically switch off after
boiling. This is normal and should not be a cause for alarm.
Do not insert any foreign objects or allow any liquid to spill into the Power Connector Hole.
When the Water Has Boiled
The kettle will automatically switch off . The light inside the
kettle will go off.
Cleaning the Kettle
The kettle exterior should be cleaned with a soft damp cloth. Do not use abrasive cleaners
or scouring pads which may damage the finish of the kettle.
Never immerse the kettle or kettle stand in water and always keep the electrical contacts
dry. Disconnect from the mains before cleaning the kettle stand.
Power Connector Hole
