LogicPower LPT-1000RL, User Manual

Page: 12 / 18

W W W . L O G I C P O W E R . U A
•WORKING MODES
The device has three operating modes, displayed three light indicators:
• Green: normal mode
If the network voltage goes out of the operational limits, 160-250V, or if the
maximum permissible total load power is exceeded (overload) or if the
transformer overheats, the red indicator lights up. In this case the output
sockets of the device are turned off to prevent damage to the connected
devices. To restore operation you need:
- turn off the most energy-consuming device
- wait for 2-3 minutes, and in case of protection operation during overload
and/or overheating the waiting time may be longer.
• Red: increase/decrease of the mains voltage above/below the
permissible operating level (from 140V to 260V), or overload or tripping of
the overheat protection of the transformer.
If the mains voltage rises or falls, but is within the operating range (from
140V to 260V), the yellow indicator lights up.
- switch on the regulator again.
In case when stabilizer still does not turning on, then the mains voltage is
outside the permissible operating limits (160-250V) and remains stably
abnormal. Wait for the voltage to drop or increase into the permissible
operating limits, then switch the stabilizer off and on again.
• Yellow: voltage stabilizing mode
- turn off the stabilizer with the power switch
•OPERATING ANS STORAGE CONDITIONS
The product can operate at the environment temperature 0-40°C and
relative humidity 10-90% (without condensing). It is recommended to store
the product in a dry room.
10