LogicPower LP-1200VA, User Manual

Page: 4 / 24

USER MANUAL 4
4. UPS installation
5. Сonnect
UPS to power
3. Unpacking and inspection
Examine the packing carton for damage. Notify your dealer immediately if damage is ob-
served. Store the packing in a safe place for possible future trans-shipment of the UPS.
Position the UPS on a sturdy, dry surface in a well-ventilated area away from direct
sources of heat. Leave at least 100mm clearance all around the UPS, as it shown on
pic3 , to provide adequate ventilation.
The UPS is intended for indoor use only. Although your UPS is very rugged, its internal
components are not sealed from the environment. Kindly note the following.
*Avoid direct sunlight.
*Avoid excessive heat
*Avoid excessive humidity or liquids.
*Avoid excessive dust.
Connect the Power Cord,
to a verified grounded sock -
et. Do not power the UPS
using a surge suppressor
or power strip. Switch the
utility power ON.
100
MM
100
MM
100
MM
pic 3
pic 4
Model:
Serial number:
Fuse:
Input
Power
socket
Output
Output
Model:
Serial number:
Fuse:
Input
Output
Output
WWW.LOGICPOWER.UA