LogicPower LP-1200VA, User Manual

Page: 10 / 24

USER MANUAL 10
Dear customer!
Thank you for purchasing the products of LOGICPOWER TM, hereinafter EQUIPMENT.
The equipment you purchased fully meets the specifications given in the attached instructions. The specified characteristics
are guaranteed by the manufacturer. The equipment will serve you long and qualitatively, given that the requirements of
application instructions, specified in the user’s manual, are observed.
When contacting a service center, it is necessary to clearly formulate the problem and provide information about the
operating conditions of the device.
When sending a device to the service center by mail, it is necessary to pack Device in the original packaging, in order to
avoid damage during transportation.
It is also necessary to describe the problem in writing and provide information on the operating conditions of the device.
If there is a need for warranty service of the equipment, please contact the dealer, firm or store where you purchased the
product, or to one of the authorized service centers (you can get the addresses of service centers at the place of purchase
or on the site: www.logicpower.ua ).
In order of equipment modernization, the manufacturer retains the right to make changes in technical specifications,
kitting and design without advance notice.
Conditions of warranty service
1. Warranty service provides free repair or replacement of component parts during the warranty period.
2. Warranty repair is carried out by an authorized service center.
3. Expediency of repair or replacement of equipment faulty parts is determined by the service center.
4. Warranty service is carried out only if you have a correctly and clearly filled warranty card. Model, serial number of the
product, date of sale shall be indicated, the warranty card shall have a clear seller’s stamp and the buyer’s signature.
5. Warranty repair is not carried out in case of inconsistency of the serial numbers of the product, and the numbers indicated
in the warranty card and on the package.
6. The warranty is not valid for the following equipment:
- with missing or damaged warranty labels, stickers, seals, hermetic gaskets;
- on the equipment, that has traces of mechanical damage or self-repair;
- with traces of accidental or deliberate ingress of foreign objects, substances, liquids, or insects into the equipment;
- used in violation of the rules of operation, or used other than as intended
- broken down because of using with faulty power supply from the electric network 220 volts.
7. Warranty service is provided if the equipment is operated under normal climatic conditions.
8. The warranty does not apply to equipment, which warranty period expired.
9. The term of warranty service is 24 months from the date of sale.
10. The warranty period for batteries is 12 months from the date of sale.
11.2 LCD-display
1. When UPS is under charging
When battery is not fully charged, battery capacity indicator with circle increasing percentage pattern, it shows battery is
charging.
When battery is full of charge. battery capacity indicator shows 100% percentage pattern.
2. When UPS in AC Mode
AC input voltage;
UPS output voltage;
The percentage of battery capacity, with the same indication of UPS charging
situation;
The percentage of load level, when it is overload to 100%, indicator continue flickers with long beeps;
Note: In this mode. shortly press on the control button, UPS will indicate output frequency for 4 seconds. (This function just
can be used in UPS with touch button.).
3. When UPS in Battery Mode
No AC input indication;
Battery output voltage is in battery mode;
The percentage of battery, if UPS is low battery, indicator continued flickers and the buzzer beeps every second;
The percentage of load. IF UPS over load, indicator continued flickers with long beeps.
WWW.LOGICPOWER.UA