11
Step 4: Insert terminals with connected wires into corresp and
– terminal at the bottom of inverter.
.
4.3 Making the inverter output cable and installation instructions
Step 1: Use wire stripper to strip the sheath and insulation layer from AC output cable at a suitable length, and press the
terminal firmly.
Step 2: Put the AC output cables (L1, L2, L3, N, PE) into the waterproof terminals.
TIPS
Making the inverter output cable and installation instructions is only for reference. Please
note that EA30-33KTLSI output wiring is 3W + N + PE; EA35-40KTLSI output wiring is 3W
+ PE.
For specific internal installation wiring, refer to the output specification value of the inverter
grid.
Step 3: Use a Phillips screwdriver to loosen the bolt in each jack, and insert each cable into the corresponding position,
and then tighten each bolt. PE cable is connected to
jack.
Step 4: Tighten the sealing cap to the housing.
i
