iv
Safety
(part 1 of 2)
Installation
The InLine Hot Water System must be installed by a
certified installer authorized by Logicor.
Our installers have to pass strict qualification standards
before they become approved to install our systems.
Our installers will advise and install your InLine Hot
Water System in the most suitable position.
WARNING - InLine Hot Water Systems must not be
located immediately below a wall socket outlet.
WARNING - Bathroom Installations.
InLine Hot Water Systems
and control panels located
in a bathroom must be positioned so that switches
and other controls cannot be touched by a person in
the bath or shower.
Water heater units must not be installed at a height
greater than 1.8m in a bathroom.
Please follow electrical safety regulations applicable
to your country in regards to installations in bathrooms.
WARNING - Do not install the InLine Hot Water System
in a wardrobe or to a ceiling.
Our installers will advise and install your InLine Hot
Water System in the most effective position to heat the
water your property needs safely and efficiently.
Safety & Maintenance
WARNING - InLine Hot Water System units must not be
used if there is any visible damage to the outer case
or the unit itself.
InLine Hot Water Systems are robust and durable but
please avoid impacts from sharp or heavy objects: a
hammer for example. In the unlikely event that any of
the front panels of your InLine Hot Water System units
become damaged, switch the unit off from the
electrical supply if it is safe to do so and contact
Logicor (CH) Ltd.
CAUTION - Some parts of this product can become hot
and cause burns. Particular attention has to be given
where children or vulnerable people are present.
InLine Hot Water Systems operate at a normal 48°C
(118 °F).
The use of this product by young children under 8
years old or infirm persons without supervision is not
recommended. Do not allow young children to play
with the appliance.
WARNING - Do not dismantle; this appliance contains
no user serviceable parts.
In the unlikely event of you requiring service please
contact your authorised distributor or Logicor by
visiting www.logicor.co.uk.
