© 2015 Logicor (CH) Ltd
clear-heater.co.uk
Page 12
►
Settings Icon (p. 7) / Main settings (p.8) /
Country select
Country Select
Setting your location allows your control panel to
automatically set the correct time, date, currency and
units of measurement settings. These are required to
display and calculate your cost performance targets
and the system temperature accurately.
Alternatively you can change the units of temperature
manually via the Time & Date screen on page 10.
Options:
Select your country
Touch the screen to select your country location. If
your country is one where the CHS or ILHWS is
available the time, date, currency and units of
measurement will be automatically set.
Press the save button to store your entry.
Adjust time zone
If necessary adjust the time zone manually by tapping
above or below the time zone reading.
Press the save button to store your entry.
