8
FreedomAlert
®
v0.2
Connecting the Base Unit
Power Connection
.
Simply plug in the AC Adapter in to the nearest elec-
trical outlet. Plug the other end of the AC power adapter into the Base unit.
You need to push the plug into the opening in the Base unit and twist 90’
clockwise to lock in place. To remove in the future, simply rotate 90’ coun-
ter-clockwise and pull outward.
Caution: Do not plug the AC Adapter into an outlet which is controlled
by a switch. The switch could accidentally be turned off, thus rendering
the Base unit inoperable after approximately 10-1 hours when the back
up batteries become discharged.
Telephone Connection
.
No special phone line or special service is required
to use your FreedomAlert. Your phone will work with your existing touch-
tone phone line and existing service. It works the same way as any cordless
phone. (
Touch Tone service is required)
. Simply plug one end of the
telephone cord into your telephone jack in the wall, and the other end into
either one of the telephone jacks at the back of the Base unit. Note - you
will feel a ‘click’ when the jacks are firmly seated in the wall and the Base
unit jack receptacles.
If you need to plug a conventional telephone into same outlet used by the
FreedomAlert, simply plug the telephone into the spare jack at the back of
the Base unit.
