background image

 

6

                       Emergency Wall Communicator

                                             

v0.2

 

“System cannot detect dial tone.”

 

 

The Base unit is not connected to the phone line or can not get a 

dial tone for some reason.

“Base and Pendant out of range.”

 

This confirms one or more of the following:

 

 

The EWC has malfunctioned.

 

 

The Base has malfunctioned.

 

 

The EWC and Base unit are not communicating with each other 

or are out or range.

Caution - To ensure proper operation, this equipment must be installed 

according to the these instructions.  We highly recommend that you 

perform this System Check after installation and at least monthly to 

confirm that your system is working properly  It is also recommended 

to perform this system check after a lightning storm that could damage 

the Base unit which is plugged into the phone line. 

Water Resistance: 

 

This  EWC  is  designed  to  be  mounted  on  a  bathroom  wall  if  desired. 

However, it should never be submerged or exposed to water continuously.

If your EWC is not working, call our tech support at 703-934-7934 .

Information The FCC Wants You To Know:

 

FCC ID: TYD3X911

This device complies with Part 15 of the FCC Rules.  Operation is 

subject to the following two conditions: (1) this device may not cause 

harmful interference, and (2) this device must accept any interference 

received, including interference that may cause undesired operation.

Canada IC: 8471A-3X911   This Class B digital apparatus complies with 

Canadian ICES-003.

Summary of Contents for 37920









Reviews: