7
3.1 Information regarding the push-push function
The TOUCH-UD handswitch is equipped with a push-push function which is used to move out the user
interface panel automatically.
Note:
to extend the control panel you have to press it while it is retracted. Afterwards you
have to release it. The control panel will extend automatically (push-push function). Do not
pull while the control panel is retracted. The control panel can get damaged.
Figure 6: links: press the user interface panel so that it extends automatically; right: lift the user interface panel to a horizontal
position and push it into the holder to retract the user interface panel
Note:
the connection cable has to form a loop of at least 10 cm to ensure that the push-push
function works properly.
Figure 7: the cable loop highlighted red shall be at least 10 cm long to ensure that the push-push function works properly
Note:
depending on the ambient temperature the user interface panel may take varying time
to move out (it may take longer if it is cooler)
