11
4.3.2 Recalling a saved position
You can use this function to adjust the desktop to a saved height. To change to a saved position,
proceed as follows:
Option A (without double click function)
1.
Press the required
memory position key
(e.g. 2) and hold it down.
The desktop will move until it reaches the saved position. If you release the key
before the saved position is reached, the desktop will stop and the saved desktop
position will not be reached.
2.
The desktop has reached the saved position. Now release the memory position key.
The display will read the current (saved) desktop position.
Option B (with double click function)
Note:
availability of the double click function depends on the software configuration of the
control unit.
1.
Double click the required
memory position key
(e.g. 2).
2.
After the double click, the desktop will automatically adjust to the saved position.
The display will show the current (saved) desktop position.
Danger:
when you change the desktop position automatically (especially without using pinch
protection), there is a higher risk of pinching. You must therefore ensure that no people or
objects are located in the hazardous area or reach into it.
Note:
if you press another key while the desktop is changing automatically to a saved
position, it will stop immediately. You then have to reactivate automatic desktop adjustment to
a preset position.
