DMD660 - OPERATING MANUAL // PAGE 12
6 PRE-ASSEMBLY
Chapters 6, 7, 8, and 9 of this Operating Manual describe the process of installing the DMD660 into the
Height-Adjustable Column. You must read the documentation for each part of the system (User Interface,
Power Hub, etc.) for that product’s mounting instructions, and the System Manual for instructions on con-
necting the system. The processes shown in Chapters 7, 8, and 9 assume the DMD660 is to be installed in a
Height-Adjustable Column in which the Top Plate can be removed (i.e. it is not permanently connected to
the Tube closest to the Table Top). Contact LOGICDATA for instructions and safety advice on mounting the
Actuator into other types of Height-Adjustable Columns.
6.1 SAFETY DURING ASSEMBLY
CAUTION
Risk of minor or moderate injury through improper handling
Improper handling of the product during assembly may lead to minor or moderate in-
jury through cutting, pinching, and crushing.
• Avoid contact with sharp edges
• Ensure assembly complies with the generally accepted standards and guidelines of
electrical engineering and furniture manufacturing
• Read all instructions and safety advice carefully
CAUTION
Risk of minor or moderate injury through tripping
During assembly and operation, poorly routed Cables may become a trip hazard.
Tripping over Cables may lead to minor or moderate injury.
• Ensure that Cables are routed properly to avoid trip hazards
• Be careful not to trip over Cables when assembling the DMD660
NOTICE
Ensure proper ESD handling during assembly. Damage that can be attributed to electro-
static discharge will void warranty claims.
NOTICE
To avoid damage to the product, measure the dimensions of the DMD660 before assem-
bly. Use a gauge or other suitable measuring equipment to do this.
NOTICE
Before assembly, all parts must be acclimatised to the ambient conditions.
NOTICE
Ensure the Height-Adjustable Column is of a sufficient length. The DMD660 must
reach its final position before the Column is fully extended.
NOTICE
Non-standard Spindle settings may only be applied with approval from LOGICDATA.
NOTICE
Do not lift the DMD660 by its cable. This will cause irreperable damage to the product.
INFO
Perform a product risk assessment so that you can respond to potential residual haz-
ards. Assembly instructions must be included in your end user Operating Manual.
