User Manual
CBX-1 / CBX-2
1. Preface
Dear customer,
Thank you for choosing a
CBX-1 / CBX-2
motor control box for height adjustable
desks from
LOGICDATA GmbH
. . You have purchased a state-of-the-art product
which complies with all safety requirements.
1.1. Appropriate Operation
CBX-1 / CBX-2 motor control boxes must solely be used for the intended application
of control of height-adjustable desks. Only motors which meet the specifications of
LOGICDATA GmbH must be used to drive lifting columns. The control box must be
installed, initially operated and functionally tested by competent personnel only. Use
other than described above is only allowed with permission of LOGICDATA. The
basic functionality is up/down movement of the desk (doable with any handset).
1.2. Functionality CBX-1 / CBX-2
The motor control boxes CBX-1 / CBX-2 offer following functionality and performance
characteristics (however, the practical application of these functions depends on the
used handset):
•
Control Boxes are available for different mains voltages
•
Broad Range of handsets available from LOGICDATA
•
Depending on type of the handset additional functionality (e.g. saving and
accessing memory positions, etc.) is available
•
Configurable stop conditions (overcurrent, timeout, limit switches)
•
Configurable reset conditions
•
Configurable duty cycle
•
Optional mains cut-off
•
PLUG DETECTION
•
Up to 4 Memorypositions
•
Pinch protection with optional squeeze line
•
DRIVE-BACK function on various conditions
Page 3/29
