ACS-CB-SENS - MANUAL // PAGE 17
8 ADDITIONAL INFORMATION
8.1 SOFTWARE-DEPENDENT FUNCTIONS
A full list of Software-Dependent Functions can be found in the Manual of the installed Control Box.
8.2 DISASSEMBLY
To disassemble, disconnect the Control Box from the mains. Then, follow the assembly instructions in re-
verse order.
8.3 MAINTENANCE
The ACS-CB-SENS and LOG-PRT-DMS are maintenance-free for their entire service lifetime.
WARNING Risk of death or serious injury through electric shocks and other hazards
Using a Collision Sensor alongside unauthorized spare or accessory parts may lead to
death or serious injury through electric shocks and other hazards.
• Only use accessory parts produced or approved by LOGICDATA
• Only use replacement parts produced or approved by LOGICDATA
• Only allow Skilled Persons to perform repairs or install accessory parts
• Contact customer services immediately if the system malfunctions
The use of unauthorized spare or accessory parts may cause system damage. Warranty
claims are void in this scenario.
8.3.1 CLEANING
1. Disconnect the Control Box or DYNAMIC MOTION system from the mains.
2. Wait 30 seconds for residual voltage to dissipate.
3. Wipe the Collision Sensors with a dry soft cloth. Never immerse a Collision Sensor in liquid.
4. Wait for the Collision Sensors to dry completely.
5. Reconnect the Control Box system.
8.3.2 REPLACING A COLLISION SENSOR
1. Disconnect the Control Box from the Mains.
2. Disconnect the LOG-PRT-DMS from the ACS-CB-SENS
3. Remove the Collision Sensor from the Table Top.
4. Mount the new Collision Sensor onto the Table Top.
5. Plug the Collision Sensor back into the Control Box or Sensor Adapter Cable.
6. Reconnect the Control Box to the Mains.
8.4 TROUBLESHOOTING
A list of common problems and their solutions can be found in the Manual of the installed Control Box.
8.5 DISPOSAL
The LOG-PRT-DMS and ACS-CB-SENS are subject to the WEEE Directive 2012/19/EU.
• Dispose of all components separately from household waste. Use designated collection
points or disposal companies authorized for this purpose
