-2-
MAC
Note: Game volume control will be de-activated while in PC / Mac mode
PS3
1.Select PS3 format on the 'Format Switch'
2.Connect the USB connector to a spare USB port on your PS3 console
3.Connect the Command headset male RCA connectors Left/Right (White/Red) to the A/V Input
of your TV
4.Connect the PS3 A/V cable Left/Right (White/Red) into the Command headset RCA connectors.
5.Your Command headset is now ready to use.
6.Please ensure you have chosen the correct settings in your PS3 menu to allow you to use the
Command Headphones.
7.Your Command Wired Headset is now ready to use, please set up the PS3 (Audio Set up) to use
the Command Wired headset:-
a. Press the PS button on your PS3 controller to access the menu on the PS3
b. Go to the 'Settings' menu on the PS3
c. Select 'Accessory Devices'
d. Select 'Audio Device Settings'
e. Select 'Input Devices'
f. Select the 'Command Wired Headset'
g. Press 'X' to confirm
h. Move to 'Output Devices'
i. Select the 'Command Wired Headset'
j. Press 'X' to confirm
k. Select OK
Above instructions are based on firmware ver. 4.46, other firmware versions may differ
