5
English
Quick Start
Powering your player
ON
Line in connection
1
Connect a sound sources with a Line or
headphone analogue output to play
through your player
as below hookup
diagram shown.
2
3
Set your personal audio player/
computer to PLAY.
iPod models that cannot be docked to unit
MP3 players
CD walkman players
Tape walkman players
Personal computers or laptops
Headphone socket
•
•
•
•
•
3.5mm jack cable (included)
On the right of the bottom panel
Charging your device with USB port
1
Charge your device using the USB Type
Noted: USB port will stop charging your
device when docking the iPhone/iPad
/iPod on the Docking Connector
.
“A” connector.
USB cable (Not included
)
On the right of the bottom panel
To USB port
To AUX jack
!
To power the player
ON:
Plug
AC cord
into
AC socket
, and plug into a live AC wall outlet.
P
ON mode.
ress the
button on the top panel or the
Power
button on the remote control to switch the player to
Power
P
button on the remote control to switch the player to Standby mode.
ress and hold the
Note: To save power, the player will enter Standby mode from ON mode automatically if there is no audio input for 15 minutes.
button on the top panel for 2 to 5 seconds and then release
or press the
Power/Pairing/Function
Power/Pairing/Function
1
2
3
!
Press the
Power/Pairing/Function
button on the top panel or press the
button to select the AUX mode.
Green light indicates.
