ZOOM ColdFire SDK
QuickStart Guide
19
Figure 5.3 – Jumper Settings for CAN
1
2
6
5
1
2
6
5
J
8
J
8
CAN port 0
non-terminated
data line
CAN port 0
terminated
data line
5.2 Jumper Settings for M5373EVB Development Kit
The following table describes the function of the jumpers on the MCF5373-10 Fire Engine.
CAN functionality is only available with the MCF5329-10 Fire Engine.
Table 5.4 – Jumper Switch Table
Jumper Settings
Function
J9
Jmp 1–2
3–4
5–6
When all pins of J9 have jumpers (and no
jumpers are on J10), header DB9 can be
used as a UART header. (See Figure 5.3,
below.)
Note:
The SSI port is muxed with
UARTB. Only one port can be used at a
time.
J6
Jmp 2–4
5
JTAG (See Figure 3.3, earlier in this
document.)
Figure 5.5 – Jumper Settings for DB9 Header
1
26
5
1
26
5
J1
0
J
9
Header DB9 as
UART header
