ZOOM ColdFire SDK
QuickStart Guide
13
3.2 Connecting the Baseboard to your PC
1.
Connect the null-modem serial cable (supplied in the kit) to the serial port
connector on the baseboard and to a COM port on the host PC. See Figure 3.2.
2.
Confirm JTAG setting for use with your specific Fire Engine, as shown in Figure 3.3.
Note:
Do not enable the JTAG unless you intend to use the JTAG with an
emulation tool.
3.
Connect the regulated 5 volt power supply to the appropriate power adapter. Plug
the power adapter into an electrical outlet and the 5 volt line output connector into
the power connector on the baseboard.
Figure 3.2 – Connecting the Baseboard to your PC
RS-232 null-modem
Power supply & power adapter
(Europe, Japan, UK, or US)
cable to host PC
Figure 3.3 – Baseboard JTAG Settings
1
2
6
5
+
–
1
2
6
5
+
–
J6
J6
Normal/BDM operation
JTAG operation
for MCF5329/73-10 Fire Engine
