background image

Extrovert 4G LTE Modem for EMEA/NA

NWK200

•  Reboot computer.
• 

Configure cellular connection

•  From the network manager menu (top right), select Edit Connections.
• 

Click Add, then <<cellular option>> and follow the prompts to add your LTE connection configuration. (Prompts such as Add a 

Mobile Connection, Set Location, Carrier Broadband Plan**, and Save this connection.)

•  Connect cellular antennas to mounts if not done already.
•  Contact cellular carrier account representative to activate service. User will need the IMEI and ICCID numbers to activate service. 

These numbers are found on the product label and on the User Guide included in the box with every system. 

** NOTE: If Verizon is Carrier, then multiple options may be presented.

SIM installed internally by Logic Supply - Ubuntu Server OS

Ubuntu Server 16 with NWK200

• 

Install tools necessary for configuration. From the Ubuntu terminal

• 

sudo rm /etc/apt/apt.conf

• 

echo deb http://us.archive.ubuntu.com/ubuntu artful main | sudo tee -a /etc/apt/sources.list

• 

sudo apt-get update

• 

sudo apt-get install -y network-manager modemmanager minicom

•  Remove interfaces which could interfere

• 

sudo vi /etc/network/interfaces

 and remove any entry for ‘enp1s0’ or ‘enp2s0’

• 

Configure modem

• 

sudo minicom -s

•  Serial port setup

•  Press a - change name to ‘/dev/ttyUSB2’
• 

Press g to change software flow control to YES

•  Exit (this will drop you to a new shell)

•  Enter these commands one at a time

• 

ate1

• 

at!entercnd=”A710”

• 

at!usbcomp=1,1,100D

• 

at!reset

•  Press CTRL+A, Q

•  Restart the computer. From Ubuntu terminal

• 

sudo reboot

•  From Ubuntu terminal

• 

sudo rm /usr/lib/NetworkManager/conf.d/<10-global…>

• 

sudo touch /usr/lib/NetworkManager/conf.d/<10-global…>

• 

sudo systemctl restart NetworkManager

• 

sudo nmcli    

This will list connections. We will use the one that starts with ‘cdc-wm’

  

SIM installed internally by Logic Supply - Ubuntu Desktop OS (cont.)

Initial Setup (cont.)

US Office

Phone: +1 802 861 2300
Email: [email protected]
www.logicsupply.com

EU Office

Phone: +31 088 5200 700
Email: [email protected]
www.logicsupply.com

7

Summary of Contents for NWK200

















Reviews: