24
GB
Electrical Connection
This cooker is designed for connection to a 400V electrical supply. The cooker is designed to operate on
an electricity supply which conforms to the electrical data shown on the Rating Plate. The cooker can
be connected to the mains only after you complete the connections in the terminal box. Your cooker is
supplied with a 4 x 2.5mm
2
connection lead of 1.5m length with a plug including a protection contact.
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
1
2
5
4
3
For the installation using 400V:
1. Release both clips then open the terminal box lid. Remove the wire the cooker was supplied with.
2. Insert the links as shown,
3. Connect the wires as shown, ensure all screws are adequately tightened. Do not over tighten as you
may risk damaging the screw threads.
4. Fix the supply cable in the cable clamp, tighten the cable clamp screw and close the cover.
400V 2~50Hz
(alternative connection)
400V 3~50Hz
(as supplied)
L1
L1
L2
L2
L3
• The following installation procedure must be carried out by a competent person. If in doubt
consult a qualified electrician. The electrical installation must comply with local regulations and
By Laws.
• The power supply cable must have these minimum requirements:
– Type: H05VV-F (PVC insulated and sheathed flexible cable)
– 400V 2~ 50Hz cores x 2.5 mm
2
minimum.
– 400V 3~ 50Hz cores x 2.5 mm
2
minimum.
• This appliance must be earthed.
• The supply cable must be positioned away from any hot parts of
the rear of the cooker. If this cannot be done then another method of protecting the supply
cable from the hot parts must be used i.e. Heat resistant sleeving or high temperature cables.
Summary of Contents for LFC64V13N
Page 74: ......
