USE AND MAINTENANCE MANUAL
– DLC
NET
Series
Use as a batcher
LOGIC S.r.l. - M0145Db.docx
Mod. L0006A01 of 30/05/2016
Page 71 of 78
The instrument makes auto-tare automatically, showing the net weight
value on the display. The
led is blinking on, indicating that it is in
progress the dosage of a manual component. The
led is blinking on,
indicating that there is a recipe in progress.
The operator introduces manually quantity and net weight is increased.
When the dosage is finished, the operator has two options:
o
Dose an additional manual component:
to do this you must
press the button
to make auto-tare. The manual dosing just
completed is stored automatically. The display will show
with
the index of the following manual component for two seconds and
then the value of the net weight after the auto-tare. The operator
can proceed with a further dose by repeating the procedure.
o
Confirm and exit:
when the sequence of manual components is
complete, instead of pressing the
button, the display will
show
and returns automatically to the main menu.
After the dosage of one or more manual components, the
led is
steady on, indicating that the last dosage of manual components has been
successfully.
6.4.4
End of recipe
(
)
If a recipe is in progress, you can end it at any time with
command. This
operation assigns the end time recipe.
Once done the
, you can print the last recipe executed as many times as
you want. Starting from the next dosage, the system will clear the print memory of
the components dosed previously.
After the ending of the recipe through
, remember to print before the
first dosage of the next recipe.
To end a recipe, must be a recipe in progress (active
led flashing) follow this
procedure:
From the weight display menu, press
to enter the top-level menu
The first menu item is
, the termination of the recipe command.
Press
to confirm and finish the recipe, but press
to cancel.
If confirmed, the instrument will show the written
, turns off the
led and the procedure is finished.
6.4.5
Recipe printing (
)
The
command allows you to print the recipe as specified in paragraph 6.2.5
(
active or not).
To command a print:
