Logic IO ApS.
Ph: (+45) 7625 0210
Holmboes Allé 14
Fax: (+45) 7625 0211
8700 Horsens
Email: [email protected]
Denmark
www.logicio.com / www.rtcu.dk
Technical Manual 1.00, PNM-200 Series V1
Page 13 of 19
Analog camera interface
PNM-210 offers connection for up to two analog cameras using the BNC connector
available at the PNM device interface cable. Analog camera #1 must be connected to the
cable labeled with
BNC-1
and analog camera #2 must be connected to
BNC-2
.
The use of the cameras is under full control of the VPL application. Please consult the
RTCU IDE on-line help for additional information.
Note:
BNC-2 may not be available on all variants of the PNM-210.
