background image

NMP – User Guide, Version 3.00

<SdCardName>

Physical name of SD card drive. Must be the Physical name, as 
seen in the Storage manager, for instance 

DSK1

. If this is not 

correct, the licenses for the maps will not work. If this is omitted,
no changes will be made, and the current settings will be used.

<drivePath>

Path to the Drive application.

<deviceId>

Optional id for use with custom devices. A value between 0 and 
15, that is added to 0x100 to become the actual device ID

5

. Is not

used on official devices.

Functionality

<DisconnectShutdown>

 

Obsoleted. Use DisconnectTimeout instead.

<DisconnectTimeout>

Timeout in seconds, when connection is lost or never 
established. When this times out, a dialog will ask to shut down, 
with a timeout of 30 seconds.
Set to -1 for default, 0 disabled. Defaults to 3 minutes on 
PNM220, disabled on all other.
If nmpPower is enabled, the device may choose to reboot 
instead, to attempt to restore the connection.

<HideTaskBar>

 

Hides the task bar and makes the application topmost. Should be 
true unless access to the underlying Windows CE device is 
needed.

<ClearRouteWhenDone>

Determines if the route is removed from the map once the 
destination has been reached.

<OnlyButtonsOnMain>

Determines if the custom buttons will be shown on all views or 
only the navigation/map view.

<dbPath>

Path to database file for storing all the data. Should not be 
changed.

<DatabasePass>

Password used to encrypt the data. Should not be changed.

Menu buttons

The following settings controls the visibility of the buttons in the menu bar.

<

ShowDrivers

>

 

Determines if the Driver button is visible. If hidden, 
functionality needing this button should not be used.

<

ShowMsg

>

 

Determines if the Message button is visible. If hidden, 
functionality needing this button should not be used.

<

ShowStops

>

 

Determines if the Stop button is visible. If hidden, functionality 
needing this button should not be used.

5 See 

nmpGetHardwareId

 in the on-line help

Page 18 of 28

Logic IO Aps 

 

Ph:   (+45) 7625 0210

Holmboes Allé 14                        

        

Fax: (+45) 7625 0211

8700 Horsens                              

Email: 

[email protected]

Denmark                                      

www.logicio.com

Summary of Contents for PNM-100





























Reviews: