3
FUNCTIONAL TEST
MR3300
To functionally test the
MR3300
will require the use of a standard credit
card. Place the credit card at one end of the Magnetic Stripe Reader.
Face the magnetic strip of the credit card toward the arrow of the MSR.
Move (swipe) the card through the reader. The
MR3300
is a bi-directional
device, therefore, it does not matter which direction the credit card is swiped.
The credit card information will appear on the monitor. The information
shown on the screen will vary according to the card used. The information
should look similar to the following:
%554384045453^JOHNDOE^4374574434?;9437577710640473475?
MR3300RS
To functionally test the
MR3300RS
will require the use of a standard
credit card and a communications utility program. Start the communi-
cation utility program and set it’s protocol to 9600, n, 8, 1. Face the
magnetic strip of the credit card toward the arrow of the MSR. Move
(swipe) the card through the reader. The
MR3300
is a bi-directional
device, therefore, it does not matter which direction the credit card is
swiped. The credit card information will appear on the monitor. The
information shown on the screen will vary according to the card used.
The information should look similar to the following:
%554384045453^JOHNDOE^4374574434?;9437577710640473475?
