17
Troubleshooting
Attached RS232 device is not working
Check that the device and LC-8100 have power.
Check RS232 connections at the device and LC-8100.
Check whether baud rate and data format settings
of application is matching with the device.
Attach the wrap plug to the device end of the
RS232 cable and run an RS232 port test program.
If the test passes, replace the serial device.
If the test fails, go to step 5.
Attach a wrap plug to the RS232 port of the
LC-8100 and rerun the RS232 loop test. If the test
passes replace the RS232 cable. If the test fails,
replace the LC-8100.
LC-8100 does not boot from internal mSATA SSD
Check in BIOS setting whether the boot device priority
is set to boot from mSATA (note that the mSATA SSD is
installed as SATA hard disk drive).
Check if the operating system on the mSATA SSD is
corrupted. If so, try reinstalling the operating system
or replace the mSATA SSD.