15
Troubleshooting
Video monitor display is blank
If the power LED on the monitor is off, check that the
monitor is properly connected to its power supply and
the power supply is properly plugged into a
functioning AC outlet.
Adjust the contrast controls on the monitor display.
Check that the video cable is plugged in properly on
both the monitor and the LC-8100.
If the power LED on LC-8100 is off, check that the
LC-8100 is properly connected to its power supply
adapter and the power adapter are properly plugged
into a functioning AC outlet.
If the LC-8100 is connected to a power supply but
the power LED is off, press the power button
to turn on the unit. If it does not turn on,
try replacing the power supply.
Replace the LC-8100 if necessary.
Video monitor display is blue or frozen
Reset the LC-8100 and check the system
information on the screen during boot up.
If unit reboots correctly, try running application again.
If same problem occurs, try reinstalling the
application software.
If unit cannot reboot correctly, try replacing the
hard disk drive (or SSD).
There are no user serviceable components inside the LC-8100. Service
should be performed only by Logic Controls or qualified personnel certified
by Logic Controls. The following guidelines will help in identifying the source
of a problem: