Troubleshooting
The ProxPAD™ choice maker should provide many years of trouble free service. If the device is
damaged or stops working there are a few things you can do to determine the problem. In some
cases you can repair the unit yourself. In other cases you will need to return the device for repair.
The ProxPAD™ device is not saying anything!
In rare cases the device may need to be reset. Remove and then reinsert the batteries.
However, the most common problem is that the batteries need to be changed. Replace the batteries as
previously instructed.
I can’t get a good recording. Recorded sound is too quiet. The end of the recording gets chopped off.
• record sounds in a very quiet room
• place the ProxPAD™ device on a table or desk.
• speak very clearly into the microphone on the front edge of the device using a normal speaking voice.
• do not touch device when speaking
My recording keep changing or appearing to erase
• make sure you are not using two tags with the same code e.g. two number 8’s
• all tags must have different codes on an individual device
Oh No! The package got damaged; I lost the battery screw; I lost the battery cover.
• some but not all of the ProxPAD™ device parts are user replaceable.
Contact the service center for advice
Page 6
Logan® ProxPAD™ Instruction Manual revision 1.0
Specifications
Dimensions
8.5x5.5x2inches/ 22x14 x 5cms
Weight
1lb / 454gms with batteries installed
Power Requirements
4 x AAA alkaline batteries or mains supply (Duracell
recommended)
Battery Life
2 months in TOUCH mode, 12 hours in PROXIMITY mode
RF Emissions
13.56 MHZ, 10uw for 10 msec when button is pressed
Operational
Temperature
0 to 120 F /-18 to 49°C
Storgae Temperature
0 to 120 F /-18 to 49°C
Humidity
0 to 90% RH, non-condensing
Sound File Capacity
20,000 sounds, 1.5 seconds average length
Custom Sounds
10,000 sounds, 1.5 seconds average length
Volume levels
0 dB, -3 dB, -6 dB, and -9 Db
Page 7
Logan® ProxPad™ Instruction Manual revision 1.0
