5
Instruction Manual
Model F100-1
Studio SAW
Logan Graphic Products Inc., 1100 Brown Street, Wauconda, IL 60084 Toll Free 1 800 331 6232 www.logangraphic.com
Operation
A. First Cut
1.
Set pivot to 45˚ on right (Fig. 7).
2.
Place moulding against fence finished
side up and rabbet facing operator.
3.
Slide moulding under saw blade far
enough so full 45˚ cut can be made.
4.
Adjust clamp feet onto moulding and
tighten knobs on both clamps.
5.
Cut moulding (Fig. 8)
• By making long full strokes accuracy is
improved and cutting is easier.
• Always cut long pieces first. If mistake is
made, shorter pieces can be
salvaged.
B. Second Cut
1.
Set pivot to 45˚ on left (Fig. 9)
2.
Using at tape measure and pencil mark
cut dimension on top of moulding (Fig. 10)
3.
Slide moulding against fence and lower
blade onto right side of mark (Fig. 11).
4.
Tighten clamps.
5.
Cut moulding (Fig. 12).
NOTE: To increase accuracy, use the
completed cut moulding to line up location
of saw blade for second cut.
6.
Deburr bottom cut edge using sandpaper,
sander or file.
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 12
Fig. 11
✔
✔
Summary of Contents for F100-1
Page 4: ......
