Everyday Use
Playback
Switch sound on/off
Sound off;
Sound on: Press the button again or set the
V+/-
volume
(loudness).
Adjusting volume
V+/V–
volume up / down
or on the unit, press
Volume -
/
+
.
Other sound settings for TV sets with RS-232C System
Interface
➠
As long as the volume bar or the selection of loudspeakers can still be seen
in listening mode.
Call up additional sound settings.
Select sound settings.
Change to the menu line below.
Make changes.
➠
You can also make sound settings in Loewe TV sets from Chassis SL 1xx
onwards in
TV-MENU
–
Sound
.
Loading listening position
You can call up the listening position that you saved previously (page 19, page 21).
TV sets with RS-232C system interface
➠
No further menu is shown.
Select the listening position.
g
OK
SOUND PROJECTOR
Select memory position
Position 1 (MEM1)
Position 2 (MEM2)
Position 3 (MEM3)
Proceed
OK
Select one of the three memory positions Position
1-3
(MEM1-3
).
Confirm
OK
.
TV sets with an RS-232C system interface and swivel
castor control
➠
No further menu is shown.
Select the listening position.
OK
SOUND PROJECTOR
Rotate TV
-30
Proceed
OK
Select one of the three memory positions
Position 1-3
(MEM1-3
). These are marked on the bar.
Selecting signal source
You can play back the sound from the devices connected to the
Sound Projector
.
Set the remote control for
Sound Projector
operation.
Press
AUX
(
PIP
) on the remote control several times
or press
SOURCE
several times on the unit to select the
required signal source.
The name of the selected input signal source and the type of corresponding input
mode are shown on the
Sound Projector
display.
23 -
