10
Frontrahmen entfernen
Der Frontrahmen des Art SL ist mittels einem doppelseitigen Klebeband mit dem Display verklebt.
Zusätzlich ist das Display ist mit 4 Torx-Schrauben am Frontrahmen befestigt, die vorab entfernt
werden müssen (Bild 1).
Bild 1
Um den Frontrahmen zu entfernen muss der Rahmen vorsichtig vom Display mittels
Abdrückwerkzeug *
)
entfernt werden.
Drücken Sie vorsichtig den Frontrahmen nach vorne, um mit der Abziehhilfe zwischen Display und
Rahmen zu kommen und setzen Sie das Abdrückwerkzeug vorsichtig an (Bild 2).
Remove Front Frame
The front frame of the Art SL is glued to the panel with an adhesive tape. Additionally
it is fixed with four Torx screws, which need to be removed (picture 1).
Picture 1
In order to remove the front frame please use the removal tool *) carefully.
Carefully push the front frame away from the panel in order to put the removal tool in
the gap between front frame and panel (picture 2)
(Bild)
Picture 2
Move the tool in the direction of the arrow shown in the pictures.
Use the tool carefully step by step over the whole width of the panel. Support
loosening of the glue by pushing the front frame away from the panel carefully.
Move the tool only to the left and right in the upper and lower part of the panel
(picture 2). On the sides of the panel the tool has to be moved up and down only
(picture 3)
(BILD)
Picture 3
Use the tool extremely carefully in order to avoid damages to the frame of the panel
due to too much leverage.
Too much leverage cause damages to the metal frame of the panel (picture 4).
*) 286-90441973 removal tool for glued front frames
Remove Front Frame
The front frame of the Art SL is glued to the panel with an adhesive tape. Additionally
it is fixed with four Torx screws, which need to be removed (picture 1).
Picture 1
In order to remove the front frame please use the removal tool *) carefully.
Carefully push the front frame away from the panel in order to put the removal tool in
the gap between front frame and panel (picture 2)
(Bild)
Picture 2
Move the tool in the direction of the arrow shown in the pictures.
Use the tool carefully step by step over the whole width of the panel. Support
loosening of the glue by pushing the front frame away from the panel carefully.
Move the tool only to the left and right in the upper and lower part of the panel
(picture 2). On the sides of the panel the tool has to be moved up and down only
(picture 3)
(BILD)
Picture 3
Use the tool extremely carefully in order to avoid damages to the frame of the panel
due to too much leverage.
Too much leverage cause damages to the metal frame of the panel (picture 4).
*) 286-90441973 removal tool for glued front frames
Remove Front Frame
The front frame of the Art SL is glued to the panel with an adhesive tape. Additionally
it is fixed with four Torx screws, which need to be removed (picture 1).
Picture 1
In order to remove the front frame please use the removal tool *) carefully.
Carefully push the front frame away from the panel in order to put the removal tool in
the gap between front frame and panel (picture 2)
(Bild)
Picture 2
Move the tool in the direction of the arrow shown in the pictures.
Use the tool carefully step by step over the whole width of the panel. Support
loosening of the glue by pushing the front frame away from the panel carefully.
Move the tool only to the left and right in the upper and lower part of the panel
(picture 2). On the sides of the panel the tool has to be moved up and down only
(picture 3)
(BILD)
Picture 3
Use the tool extremely carefully in order to avoid damages to the frame of the panel
due to too much leverage.
Too much leverage cause damages to the metal frame of the panel (picture 4).
*) 286-90441973 removal tool for glued front frames
