M 2106
Allgemeiner Teil / General Section
LOEWE.-Service
1 - 15
Service and Special Functions
"M" button –> Call up "TV-menu" or go back to previous menu.
"E" button –> Exit menu.
Cursor buttons
3 4
–> Select dialogue line.
Cursor buttons
1 2
–> Change setting.
1. Switching-on Options
1.1 Loading the Average Values / Emergency Data Set (ROM Data)
Press and hold down the "P-" button on the remote control and switch
on with the mains button. After replacement of CIC82501 (NVM), for
example, the TV set is started with the emergency data set.
In doing so, the basic data is read out from the ROM of processor
IC81500 and loaded into the NVM CIC82501:
CIC82501: (data specific to the TV can be set via the TV Menu):
- chroma and audio standards
- decoder settings
- reversing point
- OSD position
- ATS reset
- Hotel mode on/off
- AGC and AFC
- analog values (volume, brightness etc.)
- picture sharpness
- security on/off
- geometry adjustment
- programme data (channel and finetuning, station ident)
Subsequently enter your personal values, picture geometry via the TV
Menu.
1.2 Cancelling the Parental Lock Continuously
To cancel the parental lock, enter the number 3001.
This number is locked for the code number.
1.3 Software Version Number
Call up the "TV-menu".
Pressing the "V=" button displays the software version number.
1.4 Switching on with the Last Viewed Programme.
The channel position which has been selected when switching off to
standby is recovered when switching on again with the buttons "P+/P-"
(last station memory).
2. Special Functions
"TV-menu" -> "Settings" -> "Special functions".
2.1 Activating or Deactivating the Economy Mains Switch (option)
Select the "Eco switch" dialogue line.
Select the setting "1h…3h" or "off".
The TV receiver switches off at the predetermined time.
With the "off" setting, this function is not used.
By pressing the mains button
Ǽ
a longer time with the TV on, the mains
switch is released and switches the TV set completely off. This function
is carried out in a general way.
2.2 Display Time
Select the "Display time" dialogue line.
The duration of the OSD display can be set between 2…9s.
2.3 Video AV
Select the "Video AV" dialogue line.
The setting "VHS" or "SVHS" can be selected.
2.4 Colour AV
Select the "Colour AV" dialogue line.
The settings "auto", "PAL", "NTSC" and "SECAM" can be selected.
2.5 Service
Select the "Service" dialogue line.
Press the "OK" button to access the open menu.
3. Picture Settings
"TV Menu" –> "Picture".
The following settings are possible:
Contrast
0…63
Brightness
0…63
Color
0…63
Sharpness
0…5
or:
press the "red" button to select "Contrast",
press the "green" button to select "Brightness",
press the "blue" button to select "Colour".
When exiting the menu, the analog values are automatically saved.
4. Sound Settings
"TV Menu" –> "Sound".
4.1 Max. volume
You can set the maximum volume.
This setting applies also for the headphones.
4.2 AVC (Automatic Volume Control)
With the "on" setting selected, the volume is automatically adjusted to
the normal amplitude when high volume amplitudes are received.
5. Programs in the TV Menu
"TV Menu" –> "Programs".
5.1 Automatic Search
You can select from what programme position and for what place of
installation (country) the automatic saving is to be started.
5.2 Manual Adjustment
Manual entry of Program, Range, Channel, Fine, Name, and AV input.
5.2.1 Maximum Programme Number (Reversing Point)
Select "Manual adjustment".
Select the programme number which is to be the highest selectable
programme position. Select "C 00" in the Channel dialogue line. Press
the "red" button to save the setting. When this is done, only the
programme positions up to the position "C00" can be selected using
the "P+/P-" buttons in programme mode.
5.2.2 AV Input
Select "Manual adjustment".
Set the AV input to "on" or "off".
5.3 Sort/Delete
With this function you can sort or delete individual programme positions.
5.4 Enter/Change Name
With this function you can enter or change the station name.
6. Open Service Settings
"TV Menu" –> "Settings" –> "Special Functions" –> "Service".
6.1 TV-Programmer
The settings "off", "TV >> Ext", "Ext >> TV" can be selected.
Ext >> TV
The Programmer data is transferred to the TV set and
the TV set is programmed.
TV >> Ext
Programme position specific data is transferred from
the TV set to the Programmer and stored there.
Pressing the "OK" button starts the above functions.
When the data transfer is completed, "OK" is displayed on the screen.
In the event of a faulty transfer, "Error" is displayed.
6.2 Teletext Language
You can select between West/East and West/TR
6.3 Black Screen
You can select between "on" and "off".
6.4 Service Code (for the dealer)
Enter the digits 8640 to access the Service Menu.