IM-0259 rev1
IM-0281 rev0
B
INSTALLATION WITH KINETIC SWITCH.
B.1.
Connect the LED driver to 230VAC mains. Light turns on (fig. 2).
Fig. 2
B.2.
Quick push Kinetic Switch 3x firmly within 10 seconds after turning on the power (fig. 4)
0 s
10 s
~ 2 s
CLICK 3X
Fig. 4
B.3.
Luminaire will blink 1-3 times.
No light, disconnect the LED driver and repeat B.1.
CLICK
+
HOLD
0
..................... .
100%
Fig. 6
On/Off: Short press (fig. 5).
HOW TO USE WITH KINETIC SWITCH:
1
CLICK
ON/OFF
Fig. 5
Dimming: Long press (push/hold) (fig. 6).
2
FAQ:
https://www.loevschall.dk/faq/
Video:
https://www.loevschall.dk/single-white-controller/
Hereby, Loevschall A/S declares that the radio equipment type 3423100076/92 is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://
www. loevschall.dk
No light, disconnect the LED driver
and repeat B.1.
