13
First Startup Zenit
+
10 Start Group
SETTINGS > Group (List)
1.
Select group no. 1.
2.
Start group no. 1 with
.
3.
Confirm pop-up“
Start Group
” with
.
»
(Adjust) is displayed for all sensing heads.
Afterwards, an adjustment must also be performed for each non-pilot spindle.
»
The
Ad
display goes out for each non-pilot spindle when adjustment is terminated.
The adjustment is started:
»
“
Production
” is displayed in column “
Status
” and “
Active
” in column “
Adjust
”.
4.
Start and monitor the respective number of pilot spindles individually.
»
The
Ad
display goes out for each pilot spindle when adjustment is terminated.
After successful adjustment of all pilot spindles:
»
“
Completed
” is displayed in column “
Adjust
”
If “
Completed [x]
” is displayed after adjustment, it was not possible
to complete adjustment with all pilot spindles. In this case it is recom-
mended to repeat adjustment with other pilot spindles!
The other
spindles may be started only when adjustment status “
Completed
” is
displayed!
