Loepfe A905262, Fitting Instruction

Page: 24 / 26

24
3N1
CABLING OF THE SECTION ELECTRONIC (SE)
Affix the tie-wraps on a mounting. Before affixing the mount-
ing, clean the place very properly (rotor position 3 / 6 / 9 / 11,
starts from the section beginning).
Option 2: Cable Channels
For both sensor cable layings an orderly laying is necessary to
avoid unnecessary loops.
Option 1: Tie-Wraps
Fit the cable with tie-wraps or with cable channels (depends
on the machine and on the preinstallation)
And connect to the right connector of the SE-board