Loctite Zeta 7021 Operation Manual Download Page 15

Loctite expressly warrants that all products referred to in this Instruction Manual for the ZETA

®

7021 UV Spot Radiometer (hereafter

called “Products”) shall be free from defects in materials and workmanship. Liability for Loctite shall be limited, at its option, to
replacing those Products which are shown to be defective either in materials or workmanship or to credit to the purchaser the amount
of the purchase price thereof (plus freight and insurance charges paid therefore by the user). The purchaser’s sole and exclusive
remedy for breach of warranty shall be such replacement or credit.

A claim of defect in materials or workmanship in any Products shall be allowed only when it is submitted to Loctite in writing within
one month after discovery of the defect or after the time the defect should reasonably have been discovered and in any event, within
twelve months after the delivery of the Products to the purchaser. No such claim shall be allowed in respect of Products which have
been neglected or improperly stored, transported, handled, installed, connected, operated, used or maintained or in the event of
unauthorized modification of the Products including, where products, parts or attachments for use in connection with the Products are
available from Loctite, the use of products, parts or attachments which are not manufactured by Loctite.

No Products shall be returned to Loctite for any reason without prior written approval from Loctite. Products shall be returned freight
prepaid in accordance with  instructions from Loctite.

NO WARRANTY IS EXTENDED TO ANY EQUIPMENT WHICH HAS BEEN ALTERED, MISUSED, NEGLECTED, OR DAMAGED BY
ACCIDENT, OR IF THE SYSTEM IS USED TO DISPENSE ANY LIQUID MATERIAL OTHER THAN LOCTITE CORPORATION PRODUCTS.

EXCEPT FOR THE EXPRESS WARRANTY CONTAINED IN THIS SECTION, LOCTITE  MAKES NO WARRANTY OF ANY KIND
WHATSOEVER, EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCTS.

ALL WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND OTHER WARRANTIES OF WHATEVER KIND
(INCLUDING AGAINST PATENT OR TRADEMARK INFRINGEMENT) ARE HEREBY DISCLAIMED BY LOCTITE AND WAIVED BY THE
PURCHASER.

THIS SECTION SETS FORTH EXCLUSIVELY ALL OF LIABILITY FOR LOCTITE TO THE PURCHASER IN CONTRACT, IN TORT OR
OTHERWISE IN THE EVENT OF DEFECTIVE PRODUCTS.

WITHOUT LIMITATION OF THE FOREGOING, TO THE FULLEST EXTENT POSSIBLE UNDER APPLICABLE LAWS, LOCTITE EXPRESSLY
DISCLAIMS ANY LIABILITY WHATSOEVER FOR ANY DAMAGES INCURRED DIRECTLY OR INDIRECTLY IN CONNECTION WITH THE
SALE OR USE OF, OR OTHERWISE IN CONNECTION WITH, THE PRODUCTS, INCLUDING, WITHOUT LIMITATION, LOSS OF PROFITS
AND SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, WHETHER CAUSED BY NEGLIGENCE FROM LOCTITE OR OTHERWISE.

9. Warranty

13

985706 Zeta 7021 Rev A  4/17/02  4:15 PM  Page 15

Summary of Contents for Zeta 7021

















Reviews: