Loctite 98521, Operation Manual, Page: 7 / 14

4 Installation (continued)
9. Mode Switch Indicates mode setting
10. AC Connection with Fuse Holder Connects to AC power supply.
Provides pull out for easy fuse replacement.
11. Foot Switch Receptacle Activates dispense circuit
12. I/O Connection Provides alternate activation source
13. Air Inlet Air supply connection
14. Accessory Air Outlet Provide constant unregulated air
outlet
4.3 Fuse Installation/Voltage Selection Assembly
1. The AC Connector on the rear panel of the unit is the Fuse holder and the Voltage Selector.
2. To ensure proper voltage setting, all units are shipped from the factory with the Fuse
Holder/Voltage Selector disassembled from the AC Connector.
"X" V~
VOLTAGE SETTING VOLTAGE RANGE FUSE RATING
100 NOT CONNECTED ----
120 100V-120V .250 Amp, Type F
220
NOT CONNECTED ----
240 220V-240V .100 Amp, Type T