Quick start guide for RTK15D series products
Page
6
of
7
4.
Service of NTRIP caster
If you have two devices (RTK15D series products), you can configure one as the base station
and another as the rover. Then use LOCOSYS’s free service of NTRIP caster to link them. Below is
the information of LOCOSYS NTRIP caster.
For base station
For rover
Remark
IP
59.124.229.95
59.124.229.95
Port
2101
2101
Mount Point
V8DM7C8z2cnD V8DM7C8z2cnD
The user enters Mount Point
named by himself. In order to
work correctly, the name must be
different from others. Mount Point
of the base station and the rover
must be the same.
User
guest
guest
Any text is acceptable.
Password
1234
1234
It may change over time. Please
contact us for the active password.
After completing the settings, the rover can receive the correction data from the base station
to get RTK positioning.
Please note the entered location of the base station must be the actual correct location of
its antenna. RTK fix rate of the rover may decrease with the distance between the rover and the
base station.
5.
Track
To track position trajectory in centimeter level map. It’ help you realize the distribution
situation of fixed position point.
6.
Map
Open google map to display the current position on the map.
7.
Mock Reset
Reset the android mock location.
8.
Device Info
Display device model and firmware version.
