LOCOSYS Technology Inc.
20F.-13, No.79, Sec. 1, Xintai 5th Rd.,
Xizhi District, New Taipei City 221, Taiwan
886-2-8698-3698
886-2-8698-3699
© 2017 LOCOSYS Technology Inc.
Page 6 of 25
1.3.
Data cable connection
The step to connect a data cable, is to find the input port (Refer to Fig. 2) on your vehicle. For the only
purpose of tracking the Power and ACC lines are required. But the engine control line is optional.
Car
Battery
D-1X
Data
Cable
Fuel pump
relay
(Engine
Ignition
Switch
(ACC)
Figure 4
1.4.
D-1X Connection
The step to connect a D-1X tracker, is to find the plug on the other side of cable. Then, insert the plug
into D-1X’s jack. Once D-1X has power, the LEDs will begin to blink. It is means your components are
correctly connected.
Note. Select a location with a direct line of sight in the direction of the satellite.
Anten
na
Figure 5
