background image

YACHT ROUTER

24

13. 

HOW TO RECONFIGURE PORTS ON WIFI EXTENDER

Each LAN port on WIFI Extender can be reconfigured to become part of 

Vessel Network

 of your choice. For example, if your WIFI Extender is connected to Yacht Router Standard you might 

need to set two LAN ports on WIFI Extender to become part of 

Vessel Network 1

, one LAN port part of 

Vessel Network 2 

and one LAN port part of 

Vessel Network 3

. If you need port 

reconfiguration please contact Locomarine Support or your local dealer.

14. 

LOCOMARINE LIMITED FACTORY WARRANTY

Locomarine manufactures marine electronic products which are marketed and supported worldwide via the Locomarine distributor, dealer and partner network. Each and every Locomarine 

distributor, dealer and partner is committed to service and support the products in accordance with the market’s needs and requirements. In addition, the Locomarine distributor, dealer 
and partner networks are obliged to support the products irrespective of who sold and installed the product.

 

Locomarine Limited Factory Warranty for Yacht Router products can be 

downloaded from 

www.yachtrouter.com

 under Support/Download section.

15. 

DECLARATION OF CONFORMITY

Hereby, Locomarine d.o.o. declares that this WIFI Extender product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

16. 

FCC INTERFERENCE STATEMENT

This FCC statement is related to WIFI Extender model LYR-WXB-P.

This device contains FCC ID: TV7RB951G-2HND. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful interference in a residential installation.

This  equipment  generates,  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• 

Reorient or relocate the receiving antenna.

• 

Increase the separation between the equipment and receiver.

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• 

Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept 

any interference received, including interference that may cause undesired operation.

WIFI EXTENDER INSTALLATION: 

WIFI Extender MUST NOT BE COLLOCATED within 20 cm range to other WIFI Extender or Yacht Router to satisfy FCC regulations.

Summary of Contents for YACHT ROUTER


























Reviews: