390/390-2 DEL
MAGNETIC LOCKING SYSTEM
8
Form 39990 Rev. E
09/23/2005
DSM2 (SEC/BOCA
OPTION INPUT
)
N
OTE THAT THE CONNECTOR WILL
ONLY FIT ONE WAY
.
KEYPAD
/
REMOTE I
B
UTTON READER
INPUT TERMINAL
(TB9)
DSM1 (DSM
OPTION INPUT
)
N
OTE THAT THE CONNECTOR WILL
ONLY FIT ONE WAY
.
SW4
(
DIP SWITCHES
1-8)
LED
ATR
CHIP
(
OPTIONAL
)
HORN
PLUG FOR I
B
UTTON
READER ON COVER
DELAYED EGRESS INPUT
SWITCH
(
FACTORY
ADJUSTED
-
DO NOT
ATTEMPT TO ADJUST
)
ATS
JUMPER SETTING SHOWN FOR SINGLE
LOCK APPLICATIONS
.
FOR DOUBLE
LOCK
(390-2),
SEE PAGE
10
FOR
JUMPER SETTING
.
ANTI TAMPER
SWITCH
SW-2
SW-3
8. MAKE WIRING CONNECTIONS AND SET DIPSWITCHES
Connect wiring to main terminal strip. If furnished, connect DSM1 and DSM2 to board as shown. Note that if the unit
has only the DSM option, connect the plug into the DSM1 jack. If the unit has only the SEC and/or BOCA option, con-
nect the plug into the DSM2 jack. If the unit is to be used with a keypad (and the required 100CAB adapter cable) or a
TR80 or TR81 see the programming information starting on page 10. After wiring, time delay setting, initialization and
programming have been completed, secure the cover onto the lock, making sure to connect the iButton reader (DEL
models). See illustration on page 15.
See next page (9)for terminal layouts and dipswitch settings. Not all terminals will be used in all cases. Note that to
get the correct outputs, the correct options must have been ordered and the dipswitches set properly.
IMPORTANT:
DO NOT APPLY POWER UNTIL ALL CONNECTIONS HAVE BEEN MADE AND DIPSWITCHES SET
AND VERIFIED.
