3:
Once self-check completes ensure the lock operates smoothly by manually locking and
unlocking the door using the thumb turn on the interior assembly. The deadbolt should operate
smoothly without any interference or binding. If necessary, repeat step 2 and ensure that (a) the
deadbolt was extended and (b) the torque blade was inserted vertically while the deadbolt
was extended.
4:
Swipe your hand across the touch screen keypad,
the lock should close (lock). If deadbolt bounces
back or unlocks automatically it means something is
not installed correctly. Go back and repeat step 2,
same as above.
5:
Once self-check is complete, install battery cover
(H), secure with screw on top (do not over tighten).
1:
With door open and deadbolt
fully extended,
place
ribbon inside compartment and
insert 4 batteries
(note
correct -/+ polarity).
2:
After all batteries are installed, PRESS and
HOLD the
program button for 10S.
The lock will automatically start
self-check (release program button once check starts).
The self-check process determines right or left swinging
door and is very important to ensure correct installation.
IMPORTANT: if lock is not properly installed it will open and
close repeatedly.
1 2 3
4
10
INSTALLING BATTERIES
Step 4
PRESS
& HOLD
