Lock Control ST-780 Series, Operation And Installation Manual

Page: 16 / 21

7.Installation instructions
(1) Reader connector
A. N.O.Connector (please use jump to adjust)
Suitable for : Fail-secure electric lock or electric lock requires N.O. point to trigger.
14
Jump Adjustment JP10
N.O Output
(2) Wiring additional electric lock and push button
As of different types of electric lock, the wiring methods are also different .
Overall, there are two types of wiring instructions as below:
Purple
Blue
Green
Yellow
Orange
Brown
Black
Red Wiegand input (1)
Wiegand input (0)
Door open relay (N.O or N.C) terminal
Door open relay (Common) terminal
Signal (data-) receiver
Signal (data+) transmitter
Input power,negative GND
Input power,positive 12V
8-PIN
CONNECTOR
Purple
Blue
Green
Brown
Red
5-PIN
CONNECTOR
Push button door open point
Alarm output
Anti-duress output terminal
Door sensing input
Door Bell Button Output
Back
Anti-tamper
Switch
Note :
(1)Current for Door Open RELAY point is 1A/12VDC.
Please connect to a relay if a device with 24 VDC or current is exceeding.
(Please refer to p16 for wiring)
(2)The current for Anti-tamper switch is 0.1A/12VDC.
Push button
Strike lock
Rim lock
The current of rim lock is
larger than 1A (please refer to
External RELAY is used
and both points of A. EL of
the electric lock.
p16)
Door Open Relay as dry contact with maximum load of 1A@12VDC.
Diode's white
color terminal
Bla R Br O Y G Blu P
5-PIN 8-PIN
P Blu G Br R
Internal
External
Door Open
Output JUMPER
N.O Output
N.C Output
Lock Control - Kouterbaan 63 - 1840 Malderen - Belgium - Tel. +32 52 57 43 02 - info@lockcontrol.be - www.lockcontrol.be
Lock Control - Zwaluwstraat 132 - 1840 Malderen - Belgium - Tel. +32 52 57 43 02 - info@lockcontrol.be - www.lockcontrol.be