Lochinvar EcoShield SHW116-410CE, Installation, Commissioning & Maintenance Instructions

Page: 22 / 72

22
To install the flue connection to the SHW86-410 CE – SHW146-410 CE water heaters the following procedure should be followed:
1. Insert the air intake transition into the intake connection reducer and tighten the worm drive clip.
2. Fit 100mm elbow (Item 3 in 10.9.7) to cut end of extension.
3. To the side (intake) connection of the concentric adaptor (Item 1 in 10.9.7), fit the other end of the 100mm dia. Extension.
4. Fit the bottom (flue) connection of the concentric adapter to the flue connection on the heater.
10.10
C13 CONCENTRIC HORIZONTAL FLUE SYSTEMS
Flue system specifications

MANUFACTURER MUELINK AND GROL (M&G)

TEMPERATURE CLASS T120

FLUE GAS MATERIAL PP
Each concentric horizontal flue kit includes the items shown in the tables below
Item No SHHF003
CONCENTRIC HORIZONTAL FLUE ASSEMBLY MODELS
SHW35-245,SHW46-325,SHW61-325
COMPONENTS INCLUDED
Item No. Description Included
M86934 CONCENTRIC HORIZONTAL TERM Ø80/125mm PP (NO WALL PLATES) 1
M28925 TERMINAL WALL PLATES (PAIR) 1
M121602 TWIN PIPE TO CONCENTRIC ADAPTOR Ø80/80mm TO Ø80/125mm PP 1
M75256 AIR INLET TRANSITION Ø80mm ALU 1
M84471 SAMPLING POINT Ø80/125mm PP 1
M84460 CONCENTRIC BEND 90° Ø80/125mm PP 1
Item No SHHF004
CONCENTRIC HORIZONTAL FLUE ASSEMBLY MODELS
SHW86-410,SHW116-410,SHW146-410
COMPONENTS INCLUDED
Item No. Description Included
LV310758 CONCENTRIC HORIZONTAL TERMINAL Ø100/150mm PP 1
M75257 AIR INLET TRANSITION Ø100mm ALU 1
M121605 TWIN PIPE TO CONCENTRIC ADAPTOR Ø100/100mm TO Ø100/150mm PP 1
M84421 SAMPLING POINT Ø100/150mm PP 1
M84412 CONCENTRIC BEND 90° Ø100/150mm PP 1