61
Adjust set point temperature(s)
During normal operation, set point temperatures can be
adjusted from the Home Screen by pressing the DETAILS
button on the bottom of the screen (see FIG. 12-1).
1. To change a set point, use the set point slider feature or
the PLUS (+) and MINUS (-) buttons to adjust the set
points as shown in FIG. 11-4.
2. Once the set point has been adjusted to the desired setting,
press the Door Menu slider (top left) or the Setup button.
3. Press the APPLY CHANGES button on the top of the
screen.
NOTE:
The APPLY CHANGES button must be pressed to
complete programming of the controls. Failure to press the
APPLY CHANGES button will result in an unprogrammed
control. The Door Menu button will become highlighted when
there are changes that can be applied.
Figure 11-4
User Set Point Screen
Installation & Operation Manual
11
Start-up
(continued)
Set clock
The SMART TOUCH control has a built-in clock that it uses for
its night setback feature and for logging events. This clock must
be set when the appliance is installed and anytime the appliance
has been powered off for more than one day. Use the following
procedure to set the clock:
1. Press the SETTINGS button under the Lochinvar logo (see
Figure
12-1).
2. Press the SET button across from the date and time.
3. Proceed to set the date, time, and time zone.
NOTE:
Automatic Time Zone will not work.
4. Temperature units and WiFi may also be set here. These
items may be used to automatically sync the time.
5. Press the Home, View, or Back button to exit.